Andrew Twidwell

“Sweating”pipes and plumbing fixtures in summer time or during seasonal changes are often not a sign of faulty plumbing. Condensation of water vapor in the air, forms beads of moisture in warm weather on exposed pipes and fixtures containing cold water. However, when a toilet tank continues to “sweat” for hours after it has been used, it is a sign that cold water is continuing to flow through the toilet. This could be due to […]

Sink stoppages are often caused by liquid fats. Water cools as it goes to the main sewer and leaves fatty deposits along the way. Make a habit of pouring excess grease into a tin can and throw it out with the garbage to avoid stoppages.

Make a practice of letting cold water run for a few extra seconds, to carry all waste particles down and into the main line. This assists in preventing buildup in your pipes.

The problem with frozen plumbing pipes is not always the freezing, but too much force in the remedy. Thawing with a blowtorch can start a fire or cause water to flash into steamwhich might result in an explosion. It is far better to adopt the slower and more conservative procedure of melting ice by the use of a blow dryer or heat gun.

Check floor drains on a regular basis. Water in the trap can evaporate, permitting sewer gases to come into the house. Pour a pail of water into the drain periodically in order to make sure of a proper water seal. In doubt? Call ABT Plumbing.

To clear a clogged bathtub drain, hold your hand or a rag over the waste and overflow plate, cup the plunger over the drain and plunge it vigorously several times. If this does not work, the drain may require professional cabling to open it.